Buchi Rotavapo R-220 SE Manuel d'utilisateur télécharger pdf (Page 60)

5 Putting into operation

60 R-220 SE Operation Manual, Version F

5.16 Heating bath setup for 4.2 and 6.3 kW heating element

The heating element holder is labelled with the heating power data. For the 4.2 and 6.3 kW versions

only water must be used as heating transfer medium. Because of the enormous heat input there is a

risk of smoke formation and ﬁre when using other heating transfer media than water!

How to set the maximum setpoint temperature

Limiting the maximal temperature set-point to a value below 100 °C can help to eliminate processing

errors, e.g. when working with heat-sensitive sensitive substances.

AERATE

Temp

Set Temp

DOWN

Store setting

Keep the "TEMP UP" button pressed while switching on

the Rotavapor to enter the setup menu.

Set the temperature limit via the "TEMP UP" and "TEMP

DOWN" buttons. The set value is displayed as bath

temperature value on the display.

➥ Press "AERATE" button to store the setting and to

leave the menu.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 108 109

Pas de commentaire

Buchi Rotavapo R-220 SE Manuel d'utilisateur Page 60