Buchi Rotavapo R-220 SE Manuel d'utilisateur télécharger pdf (Page 50)

5 Putting into operation

50 R-220 SE Operation Manual, Version F

Start with the distribution piece and mount it at the gearbox.

Proceed with the expansion vessel. Mind upright installation!

• Use the u-shaped bridge tube to roughly align the ﬁrst condenser to the expansion

vessel.

• Fix the u-tube at the expansion vessel and subsequently bring in the condenser.

• Fasten the condenser. Fix the tube to the condenser.

• Use the y-shaped bridge tube to roughly align the outlet of the second condenser to the

ﬁrst condenser from below.

• Fix the y-piece at the ﬁrst condenser outlet.

• Subsequently bring in the second condenser, fasten it and ﬁx the y-piece.

Align the receiving ﬂask to the y-piece and fasten the clamp.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 108 109

Pas de commentaire

Buchi Rotavapo R-220 SE Manuel d'utilisateur Page 50