Buchi Rotavapo R-220 SE Manuel d'utilisateur télécharger pdf (Page 56)

5 Putting into operation

56 R-220 SE Operation Manual, Version F

5.15 Heating bath setup for 2×1800 W heating element

The heating element holder is labelled with the heating power data. The heating bath of the 2×1800 W

version can be ﬁlled with different kinds of liquid heating transfer medium. Depending on the

maximum heating bath temperature for the target application, a suitable medium must be used.

How to set the maximum setpoint temperature

Limiting the maximal temperature set-point to a value below 180 °C can help to eliminate processing

errors, e.g. when working with heat-sensitive substances.

AERATE

Temp

Set Temp

DOWN

Store setting

Keep the "TEMP UP" button pressed while switching on

the Rotavapor to enter the setup menu.

Set the temperature limit via the "TEMP UP" and "TEMP

DOWN" buttons. The set value is displayed as bath

temperature value on the display.

➥ Press "AERATE" button to store the setting and to

leave the menu.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 108 109

Pas de commentaire

Buchi Rotavapo R-220 SE Manuel d'utilisateur Page 56