Buchi Multivapo P-12 Manuel d'utilisateur télécharger pdf (Page 41)

5 Putting into operation

41 Multivapor™ Operation Manual, Version E

5.4 Glass assembly

NOTICE

Risk of glass breakage by excessive strains.

• Mount all glassware parts without strains

• Check glassware for proper ﬁxing regularly and readjust ﬁxing points if necessary

• Do not use defective glassware

• Use the protective shield (optional)

5.4.1 Type S and type C condenser

Install the condenser assemblies on the pro-

vided support or on a stable laboratory rod

ensuring that the stand base is oriented in the

direction of the condenser.

Secure the receiving ﬂask with the clip a pro-

vided for this purpose.

Fig. 5.24: Installation of the condenser assembly on the support

5.4.2 Condenser assembly with the refrigerated receiver (optional)

The refrigerated receiver a can be used as an

alternative to the receiving ﬂask and is secured

using the clip b. The internal cooling loop is

connected to a cooling source c (tap water or

recirculating chiller).

Fig. 5.25: Type S condenser with the refrigerated receiver

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 75 76

Pas de commentaire

Buchi Multivapo P-12 Manuel d'utilisateur Page 41