Buchi Multivapo P-12 Manuel d'utilisateur télécharger pdf (Page 40)

5 Putting into operation

40 Multivapor™ Operation Manual, Version E

5.3.2 Assembling the Woulff bottle (optional)

















Fig. 5.22: Assembling the Woulff bottle

Fix the Woulff bottle holder on the bottom of the instrument by replacing the existing screws with the provided

longer screws.

Fix the Woulff bottle holder on the rear side of the instrument by replacing the existing screws with the provi-

ded longer screws.



Add the cover of the Woulff bottle from above to the holder.



Fix the cover from below on the holder with the provided O-ring.



Place the gasket from below into the cover.



Screw the bottle into the holder.



Connect the delivered tube on the left angled connector of the cover.



Connect the tube from the condenser to the Woulff bottle on the right straight connector (not connected in the

ﬁgure).

5.3.3 Anti-seismic tie-down

a Hole to ﬁx the instrument in earthquake-sus-

ceptible regions.

Fig. 5.23: Anti-seismic tie-down

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Pas de commentaire

Buchi Multivapo P-12 Manuel d'utilisateur Page 40