Buchi Multivapo P-12 Manuel d'utilisateur télécharger pdf (Page 38)

5 Putting into operation

38 Multivapor™ Operation Manual, Version E

5 Putting into operation

This chapter describes the installation of the Multivapor and gives instructions on initial start-up.

NOTE

Inspect the instrument for damages during unpacking. If necessary, prepare a status report imme-

diately to inform the postal company, railway company or transport company. Keep the original

packaging for future transport.

5.1 Installation site

Place the instrument on a stable, horizontal surface and consider the maximum product dimensions.

NOTE

The shaking platform moves horizontally in an orbital manner with up to 485 rpm (for the P-12) which

may lead to considerable shaking of the surface. For this reason ensure that the surface is stable.

It is not necessary to place the instrument in a fume hood, however, the exhaust gas from the vacuum

pump should be directed toward a fume hood.

5.2 Electrical connections

NOTICE

Risk of instrument damage by wrong mains supply.

• External mains supply must meet the voltage given on the type plate

• Check for sufﬁcient grounding

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 75 76

Pas de commentaire

Buchi Multivapo P-12 Manuel d'utilisateur Page 38