Buchi Syncor Polyvap Manuel d'utilisateur télécharger pdf (Page 16)

Syncore Platform

4 Putting into Operation

Figure 10: Attachment of the condenser unit

4.6 Attachment of the condenser unit S and C

• Screwtheright-orleft-handsupportrod (depen ding

on the work-place or the working procedure) into the hole

provided in the rear feet.

• Securethecoolerbracket(shackle) to the support rod

using the cross sleeve .

• Securethecoolertotheshackle.

• Attachthetransitionpiece to the cooler with the clamp

.

• Alsosecurethereceivingvessel to the transition piece

with the clamp .

• Fastenthecoldwatersupplytotheconnectionunits

and  using GL14 screwed ﬁttings.

• Jointheconnectionelement to the valve unit with a

GL 14 sealing cap .

It is strongly recommend to secure all hose connections by

hose clips.

Figure 11: Cooler connections

 



















1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

Pas de commentaire

Buchi Syncor Polyvap Manuel d'utilisateur Page 16